Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Installation for Hampden Homeowners
When a door is beyond patching, you don’t want a patch. You want a straight answer about whether to repair or replace, and you want the new door measured, ordered, and hung without a second contractor stepping in halfway through. Our technicians have up to 13 years of experience, and we handle the whole job under one roof: teardown, framing checks, hardware, and opener setup. Every installation gets a free measure and a written estimate before anything is ordered, so the number you agree to is the number on the invoice. We install new doors across Hampden, from single-car replacements in the older alleys off East Evans to double-car upgrades closer to University Park. Call (855) 490-5104 to book your measure. Fast dispatch from 7am to 7pm, Sunday through Friday.

What Our Garage Door Installation Service Includes
We treat installation as a whole-door job, not a panel swap. That means the door, the hardware it rides on, and the opener are all part of the same conversation, and you don’t get handed off to a different company for each piece. Here’s what we actually do across the sub-services.
New Door Installation
A new door installation replaces the full door and its hardware, not just the face you see from the street. You need one when a door is bent, rotted, badly out of square, or has been repaired so many times that the tracks and panels no longer line up. We handle Hampden Garage Door Repair as a full-service shop, so the measure, the door order, the removal, and the hanging all move through one schedule. And if you’re still deciding, we’ll tell you honestly whether a repair makes more sense than a replacement.
Single Car Door
A single-car door is typically the standard 8 or 9 foot wide opening found on most residential garages. It’s the most common replacement we measure, and it matters that the spring, track, and opener are matched to the door’s actual weight. We size the springs to the door we’re hanging, which is the part beginners get wrong. If your single door is a tired steel unit that’s been dented once too often, we’ll show you the difference in weight and insulation before you commit.
Double Car Door
A double-car door covers a 16 foot opening, and it’s heavier than most people expect. The extra width means the torsion system has to be built for the load, and the opener has to be rated for the door. We measure the opening, check the header and jamb for square, and confirm the spring and opener are matched before the door ships. A double door installed over a settled or out-of-square opening will rub and bind, so we fix the opening first.
Custom Garage Door
A custom door is built to a non-standard opening, a specific look, or a window and panel layout you can’t buy off the shelf. It’s the right call when a home’s architecture calls for a particular proportion, or when an older garage in Hampden has an opening that no standard size fits. We take exact measurements and note the trim and ceiling clearance so the custom door and the opener work together. Expect a longer lead time on custom builds, since the door is made to order.
Steel Doors
Steel is the workhorse residential door: durable, low maintenance, and available with insulation. It’s the right pick for homeowners who want a clean look and don’t want to think about the door again for years. Steel does dent, though, and a dented panel can’t always be hammered back into shape, so we’ll tell you when a panel replacement is smarter than a full door. We supply the parts directly, which shortens the wait when a specific panel or hinge needs replacing.
Wood Doors
Wood doors give you a warm look that steel and aluminum can’t match, and they suit the older homes around Platt Park and Washington Park. They’re also heavier and need periodic attention to finish and hardware, so the spring and opener have to be sized for the weight. We’ll talk through the finish schedule and what a wood door asks of you over the years before you choose. If the look matters more than the maintenance, wood is worth it; if it doesn’t, we’ll say so.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Installation
We work on the brand you already have. Our technicians are familiar with Raynor and LiftMaster equipment, and we know where each one tends to wear. Raynor doors and their hardware have specific mounting patterns, and getting the springs and hinges matched to the door matters more than people realize. With LiftMaster, most of the installation conversation is about the opener: the rail, the travel limits, and the safety reverse have to be dialed in for the door’s actual weight. We also handle Chamberlain and Genie systems, which show up on a lot of the older homes around Hampden, and we can tell you where those units tend to fail.
On the door side, Clopay, Amarr, and Wayne Dalton cover most of what we install and replace, and we know which models hold up to daily use and which ones are builder-grade. Craftsman garage doors and openers are common in this part of the metro, and we’re comfortable working on that older equipment rather than pushing you straight to a new system. Whether you have Raynor, LiftMaster, Chamberlain, Genie, or any other make, we can help.
Signs You Need Garage Door Installation Right Now
- The door is bent or buckled. A visibly warped panel usually means the door has taken an impact or the tracks have shifted. Once the structure is bent, repairs tend to be temporary, and a replacement is the smarter spend.
- The door won’t stay level. If one side rises faster than the other, the spring, cable, or track is out of balance. That’s a safety issue as much as an inconvenience, and it’s worth a professional look before it gets worse.
- You’ve had the same repair three times. Repeated fixes on the same door are a sign the underlying hardware is worn out. At that point, the money goes further toward a new door than another patch.
- Rot or rust has spread past the trim. When the damage reaches the panels and the bottom section, patching won’t hold. This is especially common on older wood and steel doors in Hampden’s climate, where freeze and thaw cycles work on the bottom edge.
- The opener strains or the door jerks. A struggling opener often means the door has gotten too heavy for the system. That’s a sign the door and opener need to be evaluated together, not just the motor.
Our Garage Door Installation Process – Step by Step
- 1
Free measure and inspection. We measure the opening, check the header and jamb for square, and look at the ceiling clearance for the opener. We also check the existing springs and tracks so nothing surprises us on install day.
- 2
Written estimate. You get a written price covering the door, hardware, and opener before anything is ordered. The price is quoted and agreed before work starts, and the written estimate sets the final price.
- 3
Order and schedule. We order the door and confirm the lead time with you. Custom builds take longer than standard sizes, and we’ll tell you that up front rather than after the fact.
- 4
Removal and install. On the day, we remove the old door and hardware, verify the opening, and hang the new door with the tracks and springs set to spec. We set the opener travel limits and test the safety reverse before we call it done.
- 5
Final walkthrough. We run the door open and closed several times, check the balance, and show you the lubrication points and how the safety reverse should behave. You’ll know what normal looks like before we leave.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Hampden?
A typical new door installation in Hampden runs $700 – $2200 depending on door size, material, insulation, and whether the opener is replaced at the same time. A single-car steel door generally lands toward the lower end; a double-car or custom wood door sits toward the top. If you’re only replacing the opener, that’s a separate job, and an opener installation typically runs $250 – $550. Panel replacement, when the rest of the door is sound, usually runs $250 – $500 and can save you the cost of a full door.

What moves the price: door size and material, insulation, window options, whether the opening needs repair, and whether the opener is included. How to avoid overpaying: get the written estimate before ordering, ask what’s included in removal and disposal, and ask whether a repair would buy you more time. A free estimate covers the measure, an honest repair-or-replace recommendation, and a written price with the door and hardware itemized.
| Service | Typical Estimated Range |
|---|---|
| New Door Installation | $700 – $2200 |
| Panel Replacement | $250 – $500 |
| Opener Installation | $250 – $550 |
| Garage Door Repair | $150 – $600 |
| Spring Repair (one spring) | $180 – $340 |
These are typical estimates, not a quote. The written estimate sets the final price, and you’ll have it before any work begins. Call (855) 490-5104 for an exact quote: estimates are free.
Garage Door Installation Near Hampden – Our Service Area
We install doors across Hampden and the surrounding neighborhoods: Four Square Mile, Virginia Village, Lowry, Southmoor Park, Hilltop, Mayfair, University Park, Platt Park, Washington Park, Cherry Creek, and Greenwood Village. If you’re comparing options, our garage door installation page covers the neighboring area, and garage door installation in Virginia Village is handled the same way. Installation is scheduled by measure and order, so we’ll give you a realistic window when we book the estimate.
Serving Hampden, CO – Our Local Coverage Area
We serve Hampden and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Installation in Hampden
Garage door installation is the full replacement of a door and its hardware, including the tracks, springs, and opener setup. It’s different from a repair, which fixes one worn part on a door that’s otherwise sound. We measure the opening, order the door, remove the old one, and hang the new door so the whole system is matched. If a repair would serve you better, we’ll tell you that instead.
A standard single or double door install usually takes a few hours once the door is on site. The bigger variable is lead time: standard sizes arrive faster than custom builds, which are made to order. We confirm the timeline when we order, so you know what to expect. Call (855) 490-5104 and we’ll walk you through it.
Typical new door installation in Hampden runs $700 – $2200 depending on size, material, and insulation. Opener installation is a separate job at $250 – $550, and a panel replacement runs $250 – $500 when the rest of the door is sound. The written estimate sets the final price, and it’s agreed before work starts. Call (855) 490-5104 for an exact quote: estimates are free.
Yes. We work on LiftMaster, Chamberlain, Genie, and Raynor equipment, plus Clopay, Amarr, Wayne Dalton, and Craftsman doors. We’re familiar with each system’s quirks, so we’re not guessing at the wiring or the travel limits. If your door and opener need to be matched, we do both in one visit rather than sending you to a second contractor.
Installation is measured and ordered, so it’s scheduled rather than same-day; same-day service applies to repairs. The measure itself can often be booked quickly, and we’ll give you a realistic window at that point. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening.
Warranty coverage depends on the door and opener manufacturer, and the terms are confirmed with your written estimate. We’ll tell you what the door manufacturer covers and what we cover on the install itself before you sign. If something isn’t right after the job, call us and we’ll come back out. Call (855) 490-5104 to review the details.
Clear the garage floor and the driveway in front of the door so the technicians have room to work. Move anything hanging near the ceiling where the opener rail will go, and secure pets away from the work area. If you’re replacing a wood door, remove any decor or shelving mounted on the inside of it. That’s usually all it takes.
Schedule Your Garage Door Installation Service in Hampden Today
Whether you’re replacing a bent single door or weighing a custom build, we’ll give you a free measure and a written estimate before anything is ordered. Our technicians have up to 13 years of experience, and we work on the brand you already have. Call (855) 490-5104. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. No-obligation estimate, honest repair-or-replace advice.
Written by the team at Hampden Garage Door Repair.