Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Installation Across Englewood
If your garage door is the one that came with the house, you’re in good company in Englewood. Plenty of homes here still have their original door, and plenty of those doors are done. We install new garage doors across Englewood, from straightforward single-car swaps to custom wood and steel doors built for an older opening. Our technicians have up to 13 years of experience, we answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Call (855) 490-5104 for a free estimate and a written price before anything is ordered or installed.

Why Englewood Homeowners Call Hampden Garage Door Repair for Garage Door Installation
We know what we’re walking into in Englewood. The city’s core is mid-century ranch and split-level housing, and garage door work here is usually a retrofit of an original opening rather than a simple builder-grade swap. That changes how a job is measured, what hardware goes back in, and what the estimate looks like.
Response time to Englewood is quick, and the estimate is free. When you call, we quote the work and agree on it before anything starts, so the invoice matches what you were told. Our technicians have up to 13 years of experience and work on the brand of door and opener you already own, which means no guesswork when a 1970s unit is still bolted to the ceiling.
Englewood homeowners call us because one company covers the whole door: installation, springs, openers and parts. There’s no handing you off mid-job to someone else.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Installation Services in Englewood
New Door Installation
A new door in Englewood often means replacing a door that has been on the house since the 1960s or 70s. We measure the original opening, check the end bearing plates and track alignment, and set new torsion springs sized to the door’s weight. Typical new door installation in Englewood runs $700 – $2,200, and the written estimate sets the final price.
Single Car Door
Single-car garages are everywhere in Englewood’s older ranch and bungalow blocks. A single-car door replacement is the most common job we quote here, and it’s often paired with a fresh opener so the new door balances correctly. When you’re ready, our garage door installation team will size it to your opening.
Double Car Door
Double-car openings in Englewood’s split-level homes often sit under a low ceiling with limited headroom, which affects track choice and spring placement. We check the space before recommending a door, so you’re not stuck with a panel that won’t clear the opener rail.
Custom Garage Door
If you’re keeping the look of your Englewood home intact, a custom door lets you match the original styling without keeping original hardware that no longer works. Custom garage door work runs $700 – $2,200 typical, and we’ll tell you honestly whether a custom build is worth it or whether a standard wood or steel door does the job.
Trusted Brands We Service in Englewood
We work on the equipment you already have, and we cover most of what’s actually installed in Englewood garages. That includes LiftMaster and Chamberlain openers, Genie units, and Clopay, Amarr, Wayne Dalton, Craftsman and Raynor doors. Familiarity with these systems means we diagnose what’s wrong instead of guessing, and we can support you from a first repair through to a full replacement. When a repair no longer makes sense, we’ll say so plainly and quote the install in writing.
Common Garage Door Installation Problems We See in Englewood Homes
The failures here tend to be age and climate together, not one or the other. Englewood sits on the high plains at about 5,400 feet, with intense UV, hail from May through August, and hard winter freeze-thaw cycles. Here’s what that does to older doors:

- Original single-piece tilt-up wood doors delaminate and rot at the bottom rail. Their pivot and lifting hardware is no longer made, so there’s nothing to replace it with and a full replacement is usually the only path forward.
- Undersized or worn torsion and extension hardware fails early. Non-insulated steel and early fiberglass doors take the brunt of freeze-thaw cycling, and the opener strains because the springs, not the opener, are supposed to carry the door’s weight.
- South- and west-facing panels get hammered by UV and hail. Faded, dented panels on 1970s doors often cost more to patch than to replace, and the original weather seal and bottom section usually can’t be matched.
- Obsolete openers paired with new doors. An older opener on a fresh installation won’t balance correctly. Photo-eye sensors and the opener rail need to match the new door.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Installation in Englewood, CO
We quote installation per job, and the price is agreed before work starts. Typical estimated ranges for Englewood are below. What moves the number is the size of the opening, whether the original hardware needs re-anchoring, the door material, and whether the opener is being replaced at the same time. A 1960s single-piece wood door being retrofitted to a modern sectional usually lands higher than a simple builder-grade swap.
| Service | Typical Estimated Range |
|---|---|
| New Door Installation | $700 – $2,200 |
| Custom Garage Door | $700 – $2,200 |
| Garage Door Repair | $150 – $600 |
| Panel Replacement | $250 – $500 |
| Opener Installation | $250 – $550 |
If a repair is the honest answer, we’ll tell you that instead of pushing a full replacement. Spare spring work, if needed, runs $180 – $340 for one spring, and a matched pair usually costs about twice that. Call (855) 490-5104 for a free estimate.
We Also Serve Cities Near Englewood
Hampden Garage Door Repair installs doors across Englewood and the surrounding neighborhoods, including Virginia Village, Platt Park, University Park and Southmoor Park. The housing stock shifts as you head south, but the approach is the same: measure the opening, quote the work in writing, and install to fit. Call (855) 490-5104.
Serving Englewood, CO – Our Local Coverage Area
We serve Englewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Installation in Englewood
It usually needs full replacement. The pivot hardware, drums and lifting mechanism on those original single-piece doors are no longer manufactured, so there are no parts to fix them with, and the bottom rail on a door that old is typically rotted or delaminated anyway. The standard resolution is a retrofit: measure the original opening, re-anchor the end bearing plates, and set a modern sectional door with new torsion springs sized to its weight. Call (855) 490-5104 for an exact quote – estimates are free.
It depends on how much you use the door, not on the age of the house. A high-cycle spring costs more up front but lasts longer if the door runs several times a day. On a typical Englewood replacement, a standard spring is fine for most households. Ask us and we’ll give you the honest answer for your use. Call (855) 490-5104 for a free estimate.
The springs, not the opener, are what carry the door’s weight, so when torsion or extension springs wear out, the opener starts doing work it was never meant to do. In Englewood, freeze-thaw cycles stress older springs faster, and an undersized original spring on an aging steel or fiberglass door fails sooner than you’d expect. If the opener is straining, have the springs checked before the opener burns out. Call (855) 490-5104.
On most 1970s Englewood doors, a new door is the better call. Hail and high-plains UV take a toll on south- and west-facing panels, and once the original weather seal and bottom section are gone, matching replacement panels gets expensive. Panel replacement runs $250 – $500 typical, but if the door is at end-of-life structurally, that money is better spent on a full replacement at $700 – $2,200. Call (855) 490-5104 for a free estimate.
Look at three things: whether parts are still made for the door and its hardware, whether the bottom section or frame has rot, and whether the repair total approaches the cost of a new door. In Englewood’s 80110 and 80113 mid-century core, original single-piece tilt-up doors and their obsolete hardware usually tip toward replacement. A sectional door in reasonable shape often just needs a repair at $150 – $600. We’ll tell you which applies, honestly. Call (855) 490-5104 – estimates are free.
Get a Free Installation Estimate in Englewood
If your Englewood garage door is past its service life, or you’re not sure whether to repair or replace, call us. We’ll measure the opening, quote the work in writing, and agree on the price before anything starts. Call (855) 490-5104. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Free estimates and a written price every time.
Written by the team at Hampden Garage Door Repair.