Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does a Garage Door Cost in Englewood, CO?
Garage door repair in Englewood typically costs $150 – $600, depending on what’s broken. A single spring runs $180 – $340 (a matched pair is about twice that), opener repair lands between $120 and $320, and a full new door installation runs $700 – $2,200. Those are estimated ranges for the Englewood market in 2026, and your written estimate sets the final price.
We’re Hampden Garage Door Repair, and one call covers the whole door: springs, cables, openers, panels, and full installation. Call (855) 490-5104 for a free estimate. We answer 24/7.
Garage Door Cost Breakdown (2026)
Here’s what the common jobs cost in Englewood this year. These are typical estimated ranges, not a quote.
| Service | Typical Estimated Cost |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Spring repair (matched pair) | About $360 – $680 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
The lead range for this page is $150 – $600, and most repair calls land inside it. A single broken spring is the most common callout, and it’s usually the cheapest repair on a door that otherwise works. What pushes a job toward the top of the range: two springs going at once, a snapped cable that took a roller or bracket with it, a bent track section, or an opener that needs a full replacement instead of a part. A door that’s been hit by a car and needs panels plus track work is a different kind of job entirely, and those estimates are written in person. A new door installation sits in its own range because it’s a bigger job: removal, new panels, new track, new hardware, and springing to match the door weight.
What Affects Garage Door Pricing in Englewood
Two doors in this city can cost very differently for the same symptom. Here’s what actually moves the number.
- Door weight and spring type. A single-car door and a double-car door carry different spring loads, and the springs aren’t the same size. Heavier doors and insulated doors use larger springs, and that’s part of why a panel replacement on a big insulated door costs more than on a basic uninsulated one.
- Which brand you own. We work on the brand you already have: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. A Craftsman opener from years past and a newer LiftMaster unit diagnose and repair differently, and parts availability runs differently too. That’s a big reason we supply garage door parts directly instead of ordering them in and waiting.
- Repair versus replace. A single panel or a set of rollers is a repair. A door with bent sections, a tired opener, and worn springs starts to look like replacement math. We’ll tell you whether to repair or replace, honestly, because pushing a replacement onto a door that only needs a spring is bad business.
- Opener age and type. A belt-drive opener repair is a straightforward job. A chain-drive unit with a stripped gear or a dead logic board can cost more than a new opener installed. When opener repair approaches the install range, we’ll tell you.
- What the estimate includes. Ask. Parts, labor, old-part haul-away, and any adjustment to the door after the repair should all be spelled out. The written estimate is the price, so read it before work starts.
- How far the door has drifted. A door that’s been running out of balance for months wears rollers, cables, and the opener’s drive gear faster. Catching it early keeps the job in the low end of the range.
How Much Does Spring Repair Cost in Englewood?
Spring repair in Englewood typically costs $180 – $340 for one spring. Garage doors usually run two springs, and when one breaks the other is usually near the end of its life, so a matched pair is normally replaced together at about twice that range. Replacing one and leaving the other is a common way to pay twice.
We want to be blunt about this one: garage door springs are under extreme tension and are the most dangerous part on the whole door. A spring that lets go while someone is working on it can cause serious injury. This is a job for a trained technician, not a weekend project, and it’s exactly why we offer spring repair as its own dedicated service. Our technicians have up to 13 years of experience with spring work, and it’s the part of the trade many generalists won’t touch. Call (855) 490-5104 for a free estimate on your springs.
How Much Does Opener Repair or Replacement Cost in Englewood?
Opener repair runs $120 – $320, and a new opener installed runs $250 – $550. Where your problem sits decides which line you land on.
Repair covers the usual suspects: a remote that won’t pair, a wall button that’s dead, a safety sensor knocked out of alignment, a gear or sprocket that’s stripped, or a logic board that’s stopped responding. Those are fixes. Replacement makes sense when the unit is old, noisy, and has already had one repair, or when the repair cost climbs toward the top of the range. We service LiftMaster, Chamberlain, Genie, and Craftsman openers regularly, so we know the differences before we open the housing. If you want a straight answer on repair versus replace, Hampden Garage Door Repair will give you one and you can decide from there.
How Much Does a New Garage Door Cost in Englewood?
A new garage door installed in Englewood typically costs $700 – $2,200. That range covers the door itself, the track and hardware, new springs sized to the door, and labor. The low end is a basic single-car door in a standard size. The high end is a double-car insulated door, or a premium door from a line like Clopay or Amarr, with upgraded hardware.
Replacement is worth pricing when a door has structural damage, when panels are no longer available for the model, or when the accumulated repairs start to add up. Full installation is part of what we do, so there’s no handoff to a second contractor partway through the door’s life. If you’re weighing repair against replacement, call and we’ll walk through the math with you.
How to Save on Garage Door Repair in Englewood
There’s no coupon needed to keep a garage door bill down. Just a few habits and one honest conversation.
- Get the free estimate first. We offer free estimates, and a written estimate tells you what the job costs before any work starts. Call (855) 490-5104 and we’ll set it up.
- Fix the symptom early. A door that’s gotten loud, jumps on the track, or reverses on its own is telling you something. A roller replacement at $110 – $220 today can prevent a cable and track job later.
- Ask about the pair. If one spring broke, ask whether the second is worth replacing now. Paying for a second service call later usually costs more than doing both at once.
- Repair when repair is right. A door with good panels and a tired opener doesn’t need a new door. We’ll say so, even when a replacement would be the bigger ticket.
- Keep the door balanced. A door that’s out of balance wears everything else faster. Having it checked when it starts to feel heavy is cheaper than waiting for the bill that follows.
- Match the door to the house. If you do replace, the door doesn’t need to be the most expensive one on the street. It needs to fit the opening, the springs, and how you use it.
Why Choose Hampden Garage Door Repair in Englewood?
We’re a residential garage door specialist, and we cover the entire job in a single service call. Repairs, opener work, springs, and full installation all come from us, so you’re not lining up a different contractor at each stage of the door’s life.
The reason we can do that is breadth. We’re familiar with eight of the most widely installed brands in homes today: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That covers the budget-conscious Craftsman or Genie unit and the high-end Clopay or Amarr door equally. We also supply garage door parts directly, so we’re not waiting on a third-party order while your door sits open. Parts on hand, not on order.
Our technicians have up to 13 years of experience, and the work is done by trained professionals who are licensed and insured as their state requires. The price is set per job by the written estimate, so the number you agree to is the number you’re billed. Call (855) 490-5104 for a free estimate. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Garage Door Cost in Englewood
How much does garage door repair cost in Englewood?
Garage door repair in Englewood typically costs $150 – $600, with most jobs landing in the middle of that range. A single spring replacement is $180 – $340, cable repair is $130 – $250, and opener repair is $120 – $320. The written estimate sets the final price. Call (855) 490-5104 for an exact quote, because estimates are free.
Is it cheaper to repair or replace a garage door?
Repair is cheaper in almost every case where the door panels and track are structurally sound, and a repair typically runs $150 – $600 against $700 – $2,200 for a new door installed. Replacement makes more sense when panels are damaged beyond repair, parts are no longer available for the model, or several systems are failing at once. We’ll tell you which side of that line your door is on. Call (855) 490-5104 and we’ll give you a straight answer.
How much does a new garage door cost installed in Englewood?
A new garage door installed in Englewood typically costs $700 – $2,200, including the door, track, hardware, springs, and labor. The low end fits a basic single-car door, and the high end covers a double-car insulated door or a premium Clopay or Amarr model with upgraded hardware. Call (855) 490-5104 for a free estimate on your door.
How much does it cost to replace one garage door spring in Englewood?
One garage door spring typically costs $180 – $340 to replace in Englewood. Most doors use two springs, and a matched pair is usually replaced together at about twice that range, since a second spring on the same door is usually close to failing too. Replacing a single spring alone is a false economy. Call (855) 490-5104 for a free estimate on the pair.
Can you come out today?
Same-day service is often possible in Englewood, depending on the day’s schedule and the job. Call (855) 490-5104 with your door’s symptom and we’ll get you booked. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Get Your Free Garage Door Estimate in Englewood
Whatever’s happening with your door – a snapped spring, a stubborn opener, a dented panel, or a full replacement you’re weighing – the estimate is free and the price is settled in writing before any work starts. We service the brand you already own, replace springs as a dedicated job, and keep parts on hand so the fix happens faster. One call covers the whole door. Call (855) 490-5104 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Englewood market as of 2026. Hampden Garage Door Repair offers free estimates – call (855) 490-5104.
Written by the team at Hampden Garage Door Repair.
What Our Customers Say
"Quoted me over the phone, charged me that, left. Perfect."
- Brooke Ackerman"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Tim Whitaker"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Daniela Delgado