Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Washington Park?
Garage door work in Washington Park typically runs $175 to $710, with most repair calls landing around $300. A single broken spring is $210 to $400, opener repair is $140 to $380, and a full new door installation is $825 to $2,595. Those are estimated ranges for this market; the written estimate sets the final price, and estimates are free.
We’re Hampden Garage Door Repair, and we handle the whole door: springs, cables, panels, tracks, rollers, openers and installation. Our technicians have up to 13 years of experience and work on the brand you already have, so nothing gets handed off when the job turns out to be a Clopay panel instead of a LiftMaster opener.
Key Takeaways
- Most garage door repairs in Washington Park cost $175 to $710, depending on the part and how far the damage has spread.
- Spring replacement is priced per spring. A matched pair is usually replaced together, so a pair costs about twice the single-spring range.
- Opener repair ($140 to $380) is almost always cheaper than a new opener install ($295 to $650).
- A single damaged panel can be replaced for $295 to $590 instead of replacing the whole door.
- Estimates are free, and the written estimate is what you pay.
Garage Door Cost Breakdown (2026)
Here’s what the main jobs cost in Washington Park this year. These are typical estimated ranges for the market, not quotes. Every door is different, and a written estimate after we look at it is what locks in the price.
| Service | Typical Estimated Cost | What It Covers |
|---|---|---|
| Roller Replacement | $130 to $260 | Worn or seized rollers; doors that grind, jump or run rough |
| Track Realignment | $140 to $285 | Bent or knocked-out tracks from a hit door or a failed spring |
| Opener Repair | $140 to $380 | Motor, gear, logic board, safety sensor and remote issues |
| Cable Repair | $155 to $295 | Frayed, snapped or slipped cables, usually alongside spring work |
| Garage Door Repair | $175 to $710 | General repair calls, quoted per door after diagnosis |
| Spring Repair (one spring) | $210 to $400 | One torsion or extension spring. A pair costs about twice this range |
| Panel Replacement | $295 to $590 | One dented or cracked section, color-matched to the door |
| Opener Installation | $295 to $650 | New opener supplied and installed, including safety sensors |
| New Door Installation | $825 to $2,595 | Full door and hardware replacement, sized and insulated to your opening |
Three things push a bill toward the top of those ranges: how many parts failed together, whether the door is a heavier double-car carriage style or a light single, and whether your opener is a current LiftMaster or Chamberlain unit or an older Craftsman or Genie model where parts take longer to match. A snapped spring usually takes a cable with it, which is why a spring call so often lands at the higher end. On the install side, an uninsulated single door sits near $825 while a fully insulated double with decorative hardware climbs toward $2,595.
What Affects Garage Door Pricing in Washington Park
Washington Park sits in a stretch of Denver where a lot of housing dates from the 1920s and 1930s, along with newer infill. That mix matters for pricing in ways homeowners don’t always expect.
- Door size and weight. A 16-foot double door carries heavier springs and more of them. More spring steel and more labor mean more cost, and that’s before anything else is wrong.
- Age of the system. Older doors in the blocks near Washington Park often have extension springs, which mount above the door rather than on a torsion bar at the front. Replacing them is a different job with different labor and different hardware than a modern torsion setup.
- Opener brand and era. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor. A Craftsman or Genie unit from the 1990s is repairable, but a discontinued logic board can move the economics toward a new install. We’ll tell you which way the math points before we start.
- Match difficulty on panels. A dented panel is cheap to swap until the profile is discontinued. Standard Clopay and Amarr profiles stay available; older or custom stamping can mean waiting on a match or moving up to a full door.
- Damage that spread. A door hit by a car takes out tracks and panels together. A spring failure loads the cables and drums. What started as one part becomes three, and the estimate reflects all of it.
- Insulation and opener features. On new installation, insulated panels, belt-drive openers and smart-connect hardware add cost. If you’re replacing a door that faces the street and gets full afternoon sun, insulation is worth discussing because it protects the door from heat cycling as much as it does your garage.
How to Save on Garage Door
There’s no magic discount in this trade. The savings come from catching things early and being honest about whether a door is worth saving.
- Fix rollers and tracks before they take out a panel. A $130 to $260 roller swap stops the door from running crooked, which is what eventually cracks a section. That’s a $295 to $590 panel you don’t have to buy.
- Replace springs as a pair when one fails. Yes, a pair costs about twice the single-spring range. But a spring that was installed at the same time as its twin has the same number of cycles on it, and doing the second one later means paying labor twice.
- Repair the opener before replacing it. Opener repair runs $140 to $380 against $295 to $650 for a new install. Unless the unit is well past its life or the board is gone, repair usually wins.
- Replace the panel, not the door. If the structure is sound and only one section is damaged, a $295 to $590 panel is the answer. We’ll say so plainly when that’s the case.
- Get the estimate in writing first. A free estimate costs you nothing and gives you a number to compare. Call (855) 490-5104 and we’ll put it in writing.
Is it cheaper to repair a garage door or replace it?
Repair is cheaper in the large majority of cases. A typical repair in Washington Park runs $175 to $710, while a new door installation starts at $825 and can reach $2,595. The crossover usually comes down to the door’s structure rather than its age.
We lean toward repair when the panels are straight, the tracks are true and the opener is a current brand we can still source parts for. Replacement starts making sense when multiple panels are cracked, when the door has rusted through at the bottom section, or when the profile is discontinued and matching a panel isn’t realistic anymore. We’ll tell you which way we’d go if it were our own door, and we won’t push a replacement you don’t need. Call (855) 490-5104 for a free estimate.
Can you repair a broken spring the same day?
Usually, yes. A single spring repair runs $210 to $400, and a matched pair costs about twice that range because both are normally replaced together. Because we supply garage door parts directly rather than ordering them per job, most spring calls are resolved on the first visit.
One thing we won’t do is talk you through it over the phone. Torsion springs hold the entire weight of the door under tension, and a spring that lets go while you’re turning it with hand tools can seriously injure you. This is the one part of a garage door where we always recommend a trained professional. Call (855) 490-5104 and we’ll get it scheduled, with fast dispatch from 7am to 7pm, Sunday through Friday.
How much does a new garage door opener cost in Washington Park?
Opener installation in Washington Park typically runs $295 to $650, including the unit and the safety sensors. Opener repair, if the existing unit is salvageable, is $140 to $380.
Which way you go depends on the brand and the fault. A belt-drive LiftMaster or Chamberlain with a dead logic board is worth repairing if the motor’s healthy. An older Genie or Craftsman unit where the gear and board are both gone usually tips toward replacement. Either way, we carry the parts for the eight brands we service, so the decision doesn’t come with a two-week wait. Call (855) 490-5104 for an exact quote.
How much does it cost to replace a single garage door panel?
A single panel replacement runs $295 to $590 in Washington Park, color-matched to the rest of the door. That’s a fraction of a full installation at $825 to $2,595, which is why we check panel availability before recommending anything bigger.
Two things determine the final number: the panel profile and the color. Standard profiles from Clopay, Amarr and Wayne Dalton are straightforward. Older or custom stamping can be harder to match, and if the color has faded in the sun, a new panel may read slightly different from the rest of the door. We’ll point that out before you commit rather than after. Call (855) 490-5104 for a free estimate.
Why is my garage door so expensive to fix compared to other home repairs?
Because a garage door is a weight-bearing mechanical system, not a fixture. The springs carry the full load of the door, the cables transfer that load, and the opener does almost none of the lifting. When one piece fails, the others take the strain, which is why a $210 to $400 spring job sometimes turns into cable work at $155 to $295 on top.
The other factor is brand coverage. A generalist who doesn’t stock parts for your Raynor or Wayne Dalton has to source them, and that shows up in labor and delay. We supply garage door parts directly and work across LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor, so the job is diagnosed and finished without a second trip. Call (855) 490-5104. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday.
Same-Day Garage Door Repair in Washington Park
Most repairs we handle in Washington Park get done on the day you call, because the parts are on hand and the diagnosis is straightforward once we see the door. One call covers the whole door, whether that’s a spring, a cable, a bent track, a panel or an opener that’s stopped responding. If the door is stuck open, we’ll talk through what’s safe to do while you wait.
We work on the brand you already have. That matters in a neighborhood where doors and openers get replaced at different times, leaving a Wayne Dalton door with a Chamberlain opener and Clopay hardware. Our technicians have up to 13 years of experience across those systems. If you’re weighing a repair against replacement, we’ll give you the honest answer, not the more expensive one.
Call (855) 490-5104. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday. Estimates are free, the pricing is upfront, and the written estimate is the price. If a spring has snapped and the door won’t move, don’t force it. Leave it closed and let a trained technician handle the spring.
Pricing reflects the Washington Park market as of 2026. Hampden Garage Door Repair offers free estimates – call (855) 490-5104.
What Our Customers Say
"Quoted me over the phone, charged me that, left. Perfect."
- Brooke Ackerman"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Tim Whitaker"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Daniela Delgado